Helical Rack
There are 2 to 2.5 teeth for occlusal touch, the touch surface is large, the single point load is small, and compared with straight teeth, it has the advantages of low noise, large touch surface, and relatively large load torque.
The helical design allows multiple teeth to be in contact simultaneously, distributing the load more evenly and resulting in smoother motion. This characteristic reduces wear and extends the service life of the rack and pinion system. Additionally, helical racks are known for their ability to handle higher speeds and loads compared to straight-cut gear racks.
High-performance vector inverter adopts DSP control system to complete the optimized speed sensorless vector control and V/F control, with richer functions, more flexible application and more stable performance.
Offers multiple brands: Folinn, Delta, Omron, Siemens.
ON-LINE→MACH3:
This system operates for CNC routers through the computer or laptop. It is easy to operate, easy to maintain, stable performance and low price.
OFF-LINE→DSP:
Work offline, completely separated from the computer during the process, machine directly controlled by a handle. Recovery breakpoint functions.
11kW Fuling Inverter – Technical parameters
- Input voltage: 1AC220V±15% 3AC220V±15% 3AC380V±15%
- Power range: 220V level: 0.5kW~90kW, 380V level: 0.75Kw~800Kw
- Output frequency range: 0~200Hz
- Input frequency: 47~63Hz, power factor≥95%
- Control mode: Non-PG vector control and V/F control
- 3 V/F curves are optional: linear type, multipoint type and multiple power of two types.
- Source of operation instruction: given by panel, terminal and RS485 communication
- Overload capacity: type B : 150% rated current 60s, 180% rated current 10s; type P 120% rated current 60s, 150% rated current 10s
- Pull-in torque: non-PG vector control (SVC) 0.5Hz/150%
- Speed adjustable range: non-PG vector control 1: 100(SVC)
- Accuracy of speed control±0.5%(SVC)
- Carrier frequency: 1.0kHz~15.0kHz, and can be automatically adjusted according to temperature and load characteristics.
11kW Fuling Inverter – Features
- Frequency resolution: the given digital value is 0.01Hz, and the analog quantity is given as the highest frequency plus 0.1%.
- Torque elevation: Manual torque can elevate 0~30%
- Brake: DC braking when starting and closing down.
- Inching operation: frequency range: 0.0Hz~ maximum frequency of output, time of inching acceleration and deceleration: 0~3600.0s
- Simple PLC and multi-speed operation: as many as 8 speeds of operation can be realized through built-in PLC or controlling terminals.
- Internally installed process PID: convenient for the realization of close-loop control of the quantity of process (pressure, temperature, rate of flow);
- Constant power operation: automatically adjusts the output frequency to keep the output voltage stable during voltage fluctuations.
- DC bus can be shared by many inverters and the energy is balanced automatically.
- Input and output terminal:
- 6 digital inputs, 2 relay outputs and 1 OC transistor output
- 2 analog input and 1 analog output
- LED can display set frequency, output frequency, output voltage, current output and other parameters.
Shimpo Reducer:
- It helps to save on the costs of the operating system
- It also helps in increasing the efficiency and reliability of motor applications
- Another advantage of a shimpo reducer is that it reduces environmental pollution since it lowers the amount of gas emitted by fossil fuel.
Auto Tool Position Sensor:
- Waterproof and dustproof structure, with good durability in CNC machining operations.
- It can greatly improve the tool setting efficiency in CNC machining.
- When the stroke is exceeded, it will sound an alarm.
- Automatic detection of tool damage: If the tool is damaged or broken, the machine will automatically stop running and issue a warning.
- Automatic tool wear compensation: Once the tool head wear is detected, the relevant program can be corrected to ensure the accuracy of the workpiece.
Syntec Controller:
- 4 Axes CNC Controller
- 32 Digital I/O, 2 Analogue Outputs
- 1 Hand Wheel Input
- 2 USB Ports, 1 LAN Port
- G code Programming
- PLC Ladder Programming
